• YAKOTEC
  • AUTEC
  • I-ROBO
  • WANSHSIN
  • TOGAMI
  • Thương hiệu oriental motor
  • Thương hiệu SanyoDenki
  • Thương hiệu Mitsubishi
  • Thương hiệu Itoh Denki
  • Thương hiệu Zhongda Motor
  • Thương hiệu Ebm papst
DAT100 RS485 WEIGHING ELECTRONICMEASSURING AMPLIFIER PAVONE SISTEMI

DAT100 RS485 WEIGHING ELECTRONICMEASSURING AMPLIFIER PAVONE SISTEMI

Mã sản phẩm: DAT100 RS485
Tên thiết bị: DAT100 RS485 WEIGHING ELECTRONICMEASSURING AMPLIFIER PAVONE SISTEMI
Xuất xứ: ITALIA
Tình trạng:
Liên hệ:
Giá: Liên Hệ
CHI TIẾT SẢN PHẨM

DPC VIỆT NAM CHUYÊN CUNG CẤP DAT100 RS485 WEIGHING ELECTRONIC MEASURING AMPLIFIER CỦA HÃNG  PAVONE SISTEMI

 

DAT 100 / RS485

 

Weighing – electronic measuring amplifier

AD100 ANALOG PANVONE

 

- High performance and long term reliability
- “Snap-on” mounting on DIN rail (EN50022)
- Configuration and calibration from the frontal panel, executed with the certificates of conversion or with known weights
- 2 logical inputs and 2 relay outputs
- Serial RS232 and RS485 outputs, ASCII and Modbus RTU protocols
- The limited width allows to place a large number of transmitters within the automation housing
- Conjunction with intrinsically safe barriers for use in hazardous areas

resize ad100

 

TECHNICAL CHARACTERISTICS DAT 100 / RS485

Power supply of converter: 4 V (max 4 350 Ohm cells)
Measuring range: -4 ÷ + 4mV / V
Input sensitivity: 00:02 V / division
Linearity: <0.01% FS
Temperature drift: <0.001% FS / ° C
Display: LED 5 digits, red (7 segments), height 7mm
Status LED: 2 red
A / D converter: 24 bit
Internal resolution: 16,000,000 parts
Visible resolution: 99,999 divisions visible on the net weight
Scale interval (adjustable): 0001 ÷ 50
Filters: 0.2 ÷ 25 Hz adjustable
Keyboard: 3 mechanical buttons (below the red door)
Power supply of the device: 24 VDC ± 10% – Power consumption 2W
Operating temperature: -10 ÷ + 50 ° C (max. Humidity 85% no condensation)
Storage temperature: -20 ÷ + 60 ° C
Logic outputs: 2 optocoupler; each MAX 24 VDC / 100 mA
Logic inputs: 2 optocoupler to 24 VDC PNP (external power supply)
Serial Outputs: RS232C half duplex with Modbus RTU or ASCII protocol, full duplex RS485 with Modbus RTU or ASCII protocol
Baud rate: 2400 ÷ 115200 adjustable
Transmission distance: 15 m
Analog Output: 16 Bit optocoupler
Voltage: 0 ÷ 5 / 10V (R min10 K Ohm)
Power: 0/4 ÷ 20mA (R max 300 Ohm)
Linearity: <0.03% to FS
Temperature drift: <0.002% FS
Standard compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Power Safety
Power supply: Terminal strips for 5:08 mm screws