• YAKOTEC
  • AUTEC
  • I-ROBO
  • WANSHSIN
  • TOGAMI
  • Thương hiệu oriental motor
  • Thương hiệu SanyoDenki
  • Thương hiệu Mitsubishi
  • Thương hiệu Itoh Denki
  • Thương hiệu Zhongda Motor
  • Thương hiệu Ebm papst
DAT500 ANALOG PAVONE SISTEMI

DAT500 ANALOG PAVONE SISTEMI

Mã sản phẩm: DAT500 ANALOG
Tên thiết bị: DAT500 ANALOG PAVONE SISTEMI
Xuất xứ: ITALIA
Tình trạng:
Liên hệ:
Giá: Liên Hệ

DPC VIỆT NAM CHUYÊN CUNG CẤP DAT500 ANALOG CỦA HÃNG  PAVONE SISTEMI

 

DAT 500 / ANALOG

 

Weighing transmitters

 

DAT500

 

- Analog Output: 4-20mA, 0-20mA, 0-10Vdc, 0-5 Vdc
- High performance and reliability
- Function of upload and download programming with TESTER 1006
- The connection can also be done through the external converter
- Linearization on 10 points
- Calibration executable with certificates of transducers
- Configuration and calibration from the front or from the PC via the serial RS232 / RS485 with the program Inovation ™ (MS WINDOWS)

 

resize DAT500

 

TECHNICAL DAT 500 / ANALOG

Sensor supply: 5 V (max 6 cells of 350 Ohm)
Measuring range: -0.5 to +3.5 mV / V (optional from -3.9 to +3.9 mV / V)
Input sensitivity: 0:02 microV / division
Linearity: <0.01% of full scale
Temperature drift: <0.001% FS / ° C
Display: 6 digit, 7-segment LED red, height 14 mm
A / D converter: 24 bit
Internal resolution: > 16,000,000 points
Displayable resolution: 60,000 displayable divisions on net weight
Value divisions (selectable): x1, x2, x5
Decimals set: 0.0; 0:00; 0.000; 0.0000
Filter: selectable from 0.1 to 25 Hz
Power tool: 24 VDC ± 15% – power consumption 5 W
Operating temperature: -10 To + 50 ° C (humidity max 85% non-condensing)
Storage temperature: -20 To + 70 ° C
Logic outputs: 2 optisolate; MAX 24 VDC / 100 mA each.
Logic inputs: 2 opto-isolated 24 VDC PNP (external power supply)
Serial port: RS232C or RS422 / RS485 with Modbus RTU or ASCII protocols
Transmission distance: 15m (RS232C), 1000m (RS422 and RS485)
Peak Hold function: for dynamic measurements
Baud rate: 2400, 9600, 19200, 38400, 115200 selectable
Optional analogue output: optically isolated 16-Bit Voltage: 0 to 5 / 10V (R min10 K Ohm) Current: 0/4 to 20mA (max R 300 Ohm)
Regulatory Compliance: EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for Electrical Safety
Electrical connections: Screw terminal blocks 5 mm pitch
Dimensions and weight: 96 x 48 x 120 mm (W x H x D); 250 g
Bipolar output optional: version bipolar ± 10V