• YAKOTEC
  • AUTEC
  • I-ROBO
  • WANSHSIN
  • TOGAMI
  • Thương hiệu oriental motor
  • Thương hiệu SanyoDenki
  • Thương hiệu Mitsubishi
  • Thương hiệu Itoh Denki
  • Thương hiệu Zhongda Motor
  • Thương hiệu Ebm papst
Oriental Motor US Series US425-402E2

Oriental Motor US Series US425-402E2

Mã sản phẩm: US425-402E2
Tên thiết bị: Oriental Motor
Xuất xứ: Japan
Tình trạng:
Liên hệ: 083 977 1926
Giá: Liên Hệ

Production Information

Frame Size 80mm
Shaft/Gear Type Pinion Shaft Type
Gear Ratio -
Time Rating Continuous
Maximum Output 25W
Voltage / Frequency / Current / Power Consumption Single-Phase 220VAC / 50Hz / 0.36A / 68W
Single-Phase 220VAC / 60Hz / 0.37A / 68W
Single-Phase 230VAC / 50Hz / 0.35A / 68W
Single-Phase 230VAC / 60Hz / 0.36A / 68W
Starting Torque (Motor Shaft) Single-Phase 220VAC / 50Hz: 100mN・m
Single-Phase 220VAC / 60Hz: 100mN・m
Single-Phase 230VAC / 50Hz: 110mN・m
Single-Phase 230VAC / 60Hz: 110mN・m
Speed Control Range Depends on the combination gear head.
Permissible Torque (Motor Shaft) Single-Phase 220VAC / 50Hz, Setting speed 90r/min: 40mN・m
Single-Phase 220VAC / 60Hz, Setting speed 90r/min: 40mN・m
Single-Phase 230VAC / 50Hz, Setting speed 90r/min: 40mN・m
Single-Phase 230VAC / 60Hz, Setting speed 90r/min: 35mN・m
Single-Phase 220VAC / 50Hz, Setting speed 1200r/min: 205mN・m
Single-Phase 220VAC / 60Hz, Setting speed 1200r/min: 160mN・m
Single-Phase 230VAC / 50Hz, Setting speed 1200r/min: 205mN・m
Single-Phase 230VAC / 60Hz, Setting speed 1200r/min: 140mN・m
Permissible Torque When Gearhead is Attached Depends on the combination gear head.
Standard UL、CSA、GB
CE Marking affixed
RoHS Directive conforms
Overheat Protection Device Type Thermal protector
Speed Setting Method potentiometer on front panel
Max. Extension Distance 4.75 m between motor and control circuit
Mass: Motor 1.6kg
Mass: Control Circuit 0.45kg
  • ●There is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting