- DIN Rail Mounting
- 20-pole terminal block for connection up to 4 load cells
- 20 to 28 Vdc power supply
- Input signal from 3 to 30mV
- Adjusting Zero and Full Scale through Dip-switch and trimmer
Power supply: | 24 Vdc ±15% |
Trasducer voltage: | 10 Vcc (max 4 350 Ohm beam load cells) |
Power consumption: | 6 W |
Analog output: | 0÷5 Vcc, 0÷10 Vcc, 4÷20 mA |
Full scale range: | 3÷30 mV/V |
Linearity: | ±0.02% FS |
Temperature range: | -10 ÷ +50 °C |
Storage temperature: | -20 ÷ +70 °C |
Thermal stability: | 20 ppm/ °C |
Gain drift: | 0.005% FS/ °C |
Calibration on zero: | by 4 dip-switches and a 20 spin trimmer |
Full scale calibration: | by 4 dip-switches and a 20 spin trimmer |
Analogic filter: | Set up by single turn trimmer 270°C |
Mounting: | on DIN guide |
Dimensions: | 133 x 92 x 56 mm (L x H x D) |
Connection: | Screw terminals 5.08 mm |
CE certifications: | EN50081-1, EN5002-2 EMC, EN61010-1 LVD |
Options: | Voltage 115 o 230 Vca 50/60 Hz (for DIN’s guide) |